VELCRO® brand nylon fasteners consist of two mating components: hook and loop. The small flexible hooks engage into the softer loops for a secure and adjustable closure. To open (cycle) the VELCRO® Brand Fasterner you simply peel apart.

    VELCRO® Brand Fastener hook and loop can be attached
by various methods, including:
Sewing
Pressure Sensitive Adhesives
Dielectric Heat Sealing
Heat Activation
Mechanical
Ultrasonic Welding
   Available Colors

Black, white and beige are on hand in most cases. Colors are ordered, if not in stock, in minimum quantities of 100 yards per side. (hook or loop)
    Standard color chart
Slight color variations may occur between hook and loop and between dye lots. Additionally, color samples shown on this website may differ slightly due to different types of monitors being used for viewing.

    Widths available in most but not all products and colors

1/4
inch

3/8
inch

1/2
inch

5/8
inch

3/4
inch

1
inch

1.5
inch

2
inch

4
inch


Due to different sizes and resolutions of monitors, the measurements and dimensions of images shown are for reference and comparison only. The actual measurements are listed underneath the images.

All statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy there of is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: Seller's and manufacturer's only obligation shall be to replace the quantity of product proven to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for his/her intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer


Copyright 2005 Advance Fabrication Inc. Designed by Studio 13West.